Electrical heating, heating film, floor heating, infrapanels

HEATING BOARDS HEAT DECOR

INFRA RED
HEATING BOARDS

Electric cable at the back side of the board

Electric cable at the side of the board

Heat Decor boards are infrared electrical heaters which can be used by decoration materials. Heat Decor boards are designed for internal wall constructions, ceilings and floors – for dry walls systems. The boards are adapted for putting, painting, decoration with ceramic and stone sidings - in dry spaces and spaces with increased humidity. The board have built inside electrical energy saving system - Ecoline, which decreases electrical energy consumption proportionally to the rise of the boards temperature. The boars are easy and quick to install and very functional as infrared surface heating. Heating by Heat Decor boards allows discretion of designing and interior arrangement.

The construction of Heat Decor board consists of the mixture of magnesian cement, covered with fibreglass, with the carbonate heating system built inside. The boards have normative endurance parameters and high heating efficiency. The heating board consists of two separate heating element (P1, P2), each of them with separate electric power supply at the back of the board, each of them can be used separately (by cutting the board) or as one bigger board. The heating elements are marked by a red dashed line (heating surface) on the board surface.

FUNCTIONALITY

  • 1. Cutting the board to required size
  • 2. Cutting the board into two separate heating boards
  • 3. Electric box
  • 4. Electric socket
  • 5. Self tapping screws
  • 6. Heating surface

The construction of the heating board allows:
• its cutting down to size required
• separation of the board into two separate heating units (along with the dashed line separating heating surfaces)
• instalment of the electric sockets, boxes, temperature sensors or decoration elements – beyond the heating surface of the board (marked on the board in red line)
• joining of the heating boards in series or parallel connection to get the required heating surface.


Heat Decor heating boards can be assembled to the construction of the dry building with the usage of the sheet metal screws used beyond the heating surface.
The heating surface (marked in red line) shows the border zone on which boring holes, piercing and other damaging act are not allowed.

USAGE

Wall heating on steel construction (covering wall) - spaces with increased humidity

  • 1. Heat Decor heating board
  • 2. Steal construction- for dry walls systems
  • 3. Cable for installation Heat Decor board
  • 4. A hole in a steal structure for an installation cable
  • 5. Mineral wool insulation
  • 6. Water vapour barrier
  • 7. Self tapping screws
  • 8. Fully flexible joint sealant
  • 9. Waterproofing with liquid rubber
  • 10. Grouts layer
  • 11. Fully flexible glue for ceramicand stone tiles
  • 12. Surface finish of ceramic or stone plates

Wall heating on steel construction (partition wall) - dry spaces

  • 1. Heat Decor heating board
  • 2. Heat Decor heating board
  • 3. Steel construction- for dry walls systems
  • 4. Cable for installation Heat Decor board
  • 5. A hole in a steel structure for installation cable
  • 6. Mineral wool insulation
  • 7. Water vapour barrier
  • 8. Self tapping screws
  • 9. Elastic gypsum putty with reinforcement tape
  • 10. Grouts layer
  • 11. Fully flexible gypsum putty
  • 12. Paint finish (with layer grouts)

Ceiling heating on steel construction

  • 1. Heat Decor heating board
  • 2. Steel construction - for dry walls systems
  • 3. Electric box
  • 4. Cable for installation Heat Decor board
  • 5. Water vapour barrier
  • 6. Mineral wool insulation
  • 7. Self tapping screws
  • 8. Elastic gypsum putty with reinforcement tape
  • 9. Grouts layer
  • 10. Fully flexible gypsum putty
  • 11. Paint finish (with layer grouts)

Underfloor Heating

  • 1. 1. Heat Decor heating board
  • 2. Concrete or wooden construction
  • 3. Fully flexible glue over the entire surface
  • 4. Electric box - for Heat Decor board installation and power supply
  • 5. Fully flexible joint sealant
  • 6. Waterproofing with liquid rubber inthe case of spaces with increased humidity
  • 7. Grouts layer
  • 8. Fully flexible glue for ceramicand stone tiles in the case of sticking floor
  • 9. Floor material

ENERGY SAVINGS of infrared building heating boards

Electric energy consumption in relations to the board’s temperature by the example of Heat Decor Ecoline E-330 Board

PERFORMANCE

Thermal image of the surface heating by Heat Decor board. Even heat distribution and high efficiency of surface heating.

DIMENSIONS AND PARAMETERS

TECHNICAL PARAMETERS